Failure of Zener diode

Nov 22, 2019|

Shenzhen Shenchuang Hi-tech Electronics Co., Ltd(SChitec) is a high tech enterprise which specialized in phone accessories production and sales. Our main products include travel chargers, car chargers, USB cables, power banks and other digital products.All products are safe and reliable, with unique styles.products pass certificates like CE,FCC,ROHS,UL,PSE,C-Tick,etc,  If you are interested in, you can contact ceo@schitec.com directly.

 

Stay Charging Safely with SChitec

Failure of Zener diode

 

The main faults of Zener diodes are open circuit, short circuit and unstable Zener value. Among the three kinds of faults, the former one shows the increase of power supply voltage, while the latter two show the decrease of power supply voltage to zero voltage or the instability of output.

 

Identification and judgement

 

Positive and negative pole identification

 

In terms of shape, the positive end of the metal package zener diode body is in plane shape, and the negative end is in semicircle shape. One end of the color mark printed on the molded zener diode body is the negative pole, and the other end is the positive pole. For the voltage stabilizing diode with unclear mark, the polarity can also be distinguished by multimeter. The measurement method is the same as that of ordinary diode, that is, use multimeter R × 1K, connect two probes to two electrodes of voltage stabilizing diode respectively, measure one result, and then adjust two probes for measurement. In the two measurement results, when the resistance is small, the black lead is connected with the positive pole of the zener diode, and the red lead is connected with the negative pole of the zener diode. This refers to a pointer multimeter.

 

Identification of color ring zener diode

 

Color ring zener diodes are rare in China, most of them come from abroad, especially from Japan. Generally, color ring zener diodes are marked with models and parameters. Details can be found in the component manual. However, the color ring zener diodes are small in size, small in power, and most of them are within 10V, which are easy to break down and damage. The appearance of the color ring zener diode is very similar to the color ring resistance, so it is easy to get it wrong. The color ring on the color ring zener diode represents two meanings: one is the number, the other is the number of decimal places (generally, the color ring zener diode takes one decimal place, which is represented by Brown). It can also be understood as multiplying power, i.e. × 10 (the - 1 power of), the digital homochromatic ring resistance corresponding to the specific color)

 

Due to the small size of the small power zener diode, it is difficult to mark the model on the tube, so some foreign products use the color ring to express its nominal stable voltage value. Just like the resistance of the color ring, the color of the ring includes brown, red, orange, yellow, green, blue, purple, gray, white and black. They are respectively used to represent values 1, 2, 3, 4, 5, 6, 7, 8, 9 and 0.

 

Some diodes have only two color rings, while others have three. The first ring is closest to the negative electrode, followed by the second ring and the third ring.

 

Having only two rings. The nominal stable voltage is two digits, i.e. "XX V" (several tens of volts). The first ring represents the value on the tens of voltage bits, and the second ring represents the value on the bits. For example, if the color of the 1st and 2nd rings is red and yellow, it is 24V.

 

There are three color rings, and the color of the second and third color rings are the same. The nominal stable voltage is an integer with one decimal place, i.e. "X. V" (several points and several volts). The first ring represents the value of the voltage bit. The second and third color rings (the same color) jointly represent the value of the tenth place (the first place after the decimal point). For example, if the color of the 1st, 2nd and 3rd rings is gray, red and red in turn, it is 8.2v.

 

There are three color rings, and the color of the second and third color rings are different. The nominal stable voltage is a two digit integer with one decimal, i.e. "XX. X V" (several tens and several volts). The first ring represents the value of the voltage tens. The second ring represents the number of bits. The third ring represents the number of tenths (the first decimal place). However, this situation is rare, such as: Brown, black, yellow (10.4v) and brown, black, gray (10.8V) commonly used zener diode model comparison table (Note: the following diode models start with 1, such as 1n4728, 1n4729, etc.)

 

The difference with common rectifying diode

 

First, use the multimeter R × 1K to judge the positive and negative electrodes of the tested tube. Then turn the multimeter to R × 10K, connect the black probe to the negative pole of the tested tube, and connect the red probe to the positive pole of the tested tube. If the measured reverse resistance is much smaller than that measured with R × 1K, it means that the tested tube is a voltage stabilizing tube; otherwise, if the measured reverse resistance is still large, it means that the tube is a rectifier diode or a detector diode. The principle of this identification method is that the battery voltage used inside the R × 1K gear of the multimeter is 1.5V, which generally will not reverse breakdown the tube under test, making the measured resistance value larger. When R × 10K gear is used for measurement, the battery voltage inside the multimeter is generally above 9V. When the tested tube is a voltage stabilizing tube and the cut voltage stabilizing value is lower than the battery voltage value, it will be broken down in reverse, which greatly reduces the measured resistance value. However, if the measured tube is a general rectifier or detector diode, the resistance will not be very different whether measured with R × 1K or R × 10K. Note that when the voltage stabilized value of the measured zener diode is higher than the voltage value of the multimeter R × 10K gear, this method can not be used for discrimination.


Send Inquiry