Power management's selection factor

Nov 15, 2019|

Shenzhen Shenchuang Hi-tech Electronics Co., Ltd(SChitec) is a high tech enterprise which specialized in phone accessories production and sales. Our main products include travel chargers, car chargers, USB cables, power banks and other digital products.All products are safe and reliable, with unique styles.products pass certificates like CE,FCC,ROHS,UL,PSE,C-Tick,etc,  If you are interested in, you can contact ceo@schitec.com directly.

 

Stay Charging Safely with SChitec

Selection factor

Power management is a wide range of applications, including separate power conversion (mainly DC to DC, DC/DC), separate power distribution and detection, and a combination of power conversion and power management. Correspondingly, the classification of the power management chip also includes these aspects, such as a linear power chip, a voltage reference chip, a switching power supply chip, an LCD driving chip, an LED driving chip, a voltage detecting chip, a battery charging management chip, and the like. The following is a brief introduction to the main types and applications of power management chips.

If the designed circuit requires high noise and ripple rejection of the power supply, it requires a small PCB area (such as a handheld electronic product such as a mobile phone), the circuit power supply does not allow the use of an inductor (such as a mobile phone), and the power supply needs to have instantaneous calibration and output. State self-test function, which requires voltage drop of regulator and low power consumption, low line cost and simple scheme, then linear power supply is the most appropriate choice. This power supply includes the following technologies: precision voltage reference, high performance, low noise op amp, low dropout regulator, low quiescent current.

In the case of low-power power supply, op amp negative power supply, LCD/LED drive, etc., a capacitor-based switching power supply chip, also known as a charge pump, is often used. There are many chip products based on the working principle of charge pump, such as AAT3113. This is a white LED driver chip consisting of a low noise, constant frequency charge pump DC/DC converter. The AAT3113 uses a fractional (1.5x) conversion to increase efficiency. The device drives four LEDs in parallel. The input voltage range is 2.7V to 5.5V, which provides approximately 20mA per output. The device also features thermal management system protection to protect against short circuits on any of the output pins. Its embedded soft-start circuit prevents current overshoot at startup. The AAT3113 utilizes a simple serial control interface to enable, turn off, and 32-level logarithmic scale brightness control.

Inductor-based DC/DC chips are used in the widest range of applications, including handheld computers, cameras, battery backup, portable instruments, micro-phones, motor speed control, display bias, and color adjusters. The main technologies include: BOOST structure current mode loop stability analysis, BUCK structure voltage mode loop stability analysis, BUCK structure current mode loop stability analysis, overcurrent, overtemperature, overvoltage and soft start protection functions, synchronization Rectification technology analysis, reference voltage technical analysis.

In addition to the basic power conversion chip, the power management chip also includes a power control chip for the purpose of rationally utilizing the power supply. Such as NiH battery intelligent fast charging chip, lithium ion battery charging and discharging management chip, lithium ion battery over voltage, over current, over temperature, short circuit protection chip; chip management between line power supply and backup battery, USB power management Chip; charge pump, multi-channel LDO power supply, power-up timing control, multiple protection, complex power supply chip for battery charge and discharge management.

Especially in consumer electronics. For example, portable DVDs, mobile phones, digital cameras, etc., can provide complex multi-channel power supply with almost one to two power management chips, so that the performance of the system is optimized.


Send Inquiry