How the transformer works
Oct 17, 2019|
Stay Charging Safely with SChitec
How the transformer works
1. It is a special transformer that outputs and inputs a set of coils. Boost and step-down are realized by different taps. The tap voltage is lower than that of the shared coil. The tap voltage is higher than the shared coil.
2, in fact, the principle is the same as the ordinary transformer, but his original coil is its secondary coil ``` general transformer is the left one of the original coil through the electromagnetic induction, so that the right secondary coil generates voltage, the autotransformer is their own influence Yourself.
3. The autotransformer is a transformer with only one winding. When used as a step-down transformer, a part of the coil is extracted from the winding as a secondary winding; when used as a step-up transformer, the applied voltage is only applied to the winding. On the line. Usually, the part of the winding that belongs to both the primary and secondary is called the common winding, and the rest of the autotransformer is called the series winding. The autotransformer of the same capacity is not only small in size but also high in efficiency and transformer. The larger the capacity, the higher the voltage. This advantage is more prominent. Therefore, with the development of power systems, the improvement of voltage levels and the increase of transmission capacity, self-twisting transformers have been widely used due to their large capacity, low loss and low cost.


