Development of USB Charging standard

Oct 06, 2022|

Development of USB Charging standard


In 2010, the Battery Charging (BC) group of the USB-IF Association developed the Battery Charging V1.2 (BC1.2) protocol, which was mainly used to regulate the demand of Battery Charging. This protocol was first implemented based on the USB2.0 protocol. Later QC, AFC, SCP, FCP and other almost all private quick charge standards (except Apple) are extended from BC1.2.



In July 2012, USB-IF released the USB PD1.0 standard, based on the ubiquitous USB-A and USB-B ports at the time, which envisioned A power supply capability of up to 100W via USB 3.0 and USB 2.0 ports, but using A 24MHz frequency, coupled to A power line carrier, Due to signal integrity and bidirectional power transmission problems, it was soon replaced by USB PD2.0.


In August 2014, USB-IF Association released the revolutionary Type-C 1.0 interface standard and USB PD2.0 standard. Through USB-C connector and adding CC communication line in the cable, the bidirectional power transmission and the maximum 100W power supply are realized. The difficulties encountered in the implementation of USB PD1.0 are solved.


At the end of 2015, the USB-IF Association introduced the USB PD3.0 standard, and in February 2017 released an important update to the USB PD3.0 standard, which added programmable power PPS on top of the USB PD3.0 standard. PPS is a fast charge form with a high share of Android camp. It can achieve 100W high-power fast charge through fine adjustment of 20MV and the built-in charge pump of mobile phone.

chargersupplierss.com

Send Inquiry