Circuit composition principle

Nov 05, 2019|

Shenzhen Shenchuang Hi-tech Electronics Co., Ltd(SChitec) is a high tech enterprise which specialized in phone accessories production and sales. Our main products include travel chargers, car chargers, USB cables, power banks and other digital products.All products are safe and reliable, with unique styles.products pass certificates like CE,FCC,ROHS,UL,PSE,C-Tick,etc,  If you are interested in, you can contact ceo@schitec.com directly. 

Stay Charging Safely with SChitec

Circuit composition principle

Circuit composition

The common-amplitude configuration basic amplification circuit has an input signal applied between the base and the emitter, and coupling capacitors C1 and Ce are considered to be short-circuited to the AC signal. The output signal is taken out from the collector to the ground, and the DC amount is separated by the coupling capacitor C2, and only the AC signal is applied to the load resistor RL. The cascode configuration of the amplifying circuit actually means that the triode in the amplifying circuit is a cascode configuration.

When the input signal is zero, the DC power supply supplies a DC base current and a DC collector current to the triode through the bias resistors, and forms a certain DC voltage between the three poles of the triode. Due to the DC blocking function of the coupling capacitor, the DC voltage cannot reach the input and output terminals of the amplifier circuit.

When the input AC signal is applied to the emitter junction of the triode through the coupling capacitors C1 and Ce, the voltage on the emitter junction becomes a superposition of the DC and DC. The signal in the amplifying circuit is more complicated. The symbols of each signal are as follows: Due to the current amplification of the triode, ic is several times larger than ib. Generally, as long as the circuit parameters are properly set, the output voltage can be much higher than the input voltage. Times. The amount of AC in the uCE is partially passed through the coupling capacitor to the load resistor to form an output voltage. Complete the amplification of the circuit.

It can be seen that the DC signal of the collector of the triode in the amplifying circuit does not change with the input signal, and the AC signal changes with the input signal. During the amplification process, the collector AC signal is superimposed on the DC signal. After the coupling capacitor, only the AC signal is extracted from the output. Therefore, when analyzing the amplifying circuit, the method of separating the AC and DC signals can be used, and can be divided into a DC path and an AC path for analysis.

Composition principle

1. Ensure that the core device of the amplifier circuit operates in an amplified state, that is, it has a proper bias. That is to say, the emitter junction is positively biased, and the collector junction is reverse biased.

2. The input loop should be set such that the input signal is coupled to the input electrode of the triode to form a varying base current, resulting in a current control relationship of the triode that becomes a change in collector current.

3. The output loop should be set to ensure that the current signal after the transistor is amplified is converted to the form of charge (output voltage or output current) required by the load.

 


Send Inquiry