Solve The Problem Of No Response After Connecting The Data Cable To The Computer

Jun 01, 2018|

    When we use computers and mobile phones in daily life, we will encounter such problems, that is, using a mobile phone data cable to connect to a computer to charge or transmit data does not respond. Most people often need to copy data from their cell phones to their computers during the work process. However, there is an annoying problem that the cell phone data lines are not connected to the computer. So how do you solve the problems that the cell phone data lines are connected to the computer?

    Solution 1. First of all, confirm whether the USB interface of the notebook or desktop computer has its own problems. You can use U disk and other tools to test whether it can be read normally. In addition, when using the desktop computer, try to insert the USB interface behind the host.

 

    Solution 2. Check the USB data cable. Make sure that the phone data cable used by the certificate is correct. You can charge and transmit data normally. If there is a problem with the data cable, the computer will not be able to read the phone. You can use the data cable to charge the phone first on the plug-in board. If it can be used, then there is no problem. If not, change it to a USB cable.


    Solution 3. The first two steps are no problem. Then we use the data cable to connect the computer and the mobile phone. The first step in the connection between the mobile phone and the computer is to turn on the “USB debugging” switch of the mobile phone. Click "Settings" - "Applications" - "Development Tools", and check the USB debugging switch.


    Solution 4, computer problems, the situation is not consistent with the above, another reason may be that the computer does not install the driver, you can install the appropriate driver according to computer prompts. Under normal circumstances, we can go to the mobile phone official website to find the corresponding model of the driver to download, but this method is more troublesome, it is recommended that netizens directly download some third-party mobile phone management tools, such as Lu master, pea clip, 360 mobile assistant, etc., use This type of tool is quite worry-free. After the phone is connected to the computer, the corresponding driver is automatically detected and then installed.


    Solution 5. Make sure that the mobile device is not disabled in the settings manager. Right-click on the computer icon and select "Manage" from the popup menu. In the "Computer Management" interface that opens, expand the Android phone item, right-click the disabled phone driver, and select "Enable".


    Solution 6, if the above methods can not solve there are problems, is the phone problem, take the phone to a professional mobile phone repair shop to see if it is not a hardware or something bad, if the phone is no problem, look at the data line is broken No, if the data cable is broken, it is recommended to replace the new data cable.


Send Inquiry