How To Deal With High Frequency Noise In Switching Power Supply

Sep 05, 2018|


       With the development of semiconductor devices, electronic devices have been significantly miniaturized. In the foreseeable future, ultra-small switching power supplies are the center of future electronic devices. Although the power supply has been miniaturized from the loss type to the switch type, it is still bulky and heavy compared with other circuit blocks. As a method of further miniaturization, a transformer, a coil, a capacitor, and the like are reduced in size and weight by adopting an improved switching frequency string.


       The initial switching power supply frequency is usually 20KHz. The reason is that the components used, especially semiconductors, are expensive and cannot be high frequency. Can only take 20KHz.


       In the future, semiconductor devices, magnetic materials, capacitors, etc., such as switching elements and rectifiers with improved high-frequency operation characteristics, have been developed for the miniaturization of power adapters. Because of the advancement of application techniques of these components, 50KHz to 100KHz are now dominant. There are also a few products that go beyond 200KHz.


       However, in the switching power supply, some of the switching elements or some of the rectifiers have high frequency noise. Therefore, the above-mentioned noise that does not exist completely in the lossy power supply is transmitted not only to the output side but also to the input city line. When this level of noise is large, not only does the device malfunction, but it sometimes passes through commercial commercial wires or directly affects other devices as radiated noise.


       Here, in order to improve the frequency of change and obtain a high frequency, it is necessary to try to increase the speed of the switching operation, and the noise level generated thereby is further increased. In order to miniaturize the power supply, it is necessary to prevent the heat source from being collected due to miniaturization, and it is necessary to consider the power loss from the entire circuit. Therefore, in the case of a high-frequency switching power supply, high power and low noise are important positions as important issues.

.


Send Inquiry