Do Not Mix Phone Data Lines
May 02, 2018| There are hundreds of data lines on the market with different specifications, different models, and different sizes. Under normal circumstances, the receiving and sending ends of different brands and products are different. Therefore, data lines cannot be directly mixed, even if sometimes different. Although electronic products can be used under unsupported data lines, they are prone to problems.
The data lines are all sub-models. Different mobile phones and cameras have different data lines, and of course the same. This requires specific models of mobile phones and cameras. In addition, mobile phones and cameras also have many standard USB data lines that can be used with MP3s.
For example, when a file is transmitted, the phenomenon of half-way interruption is prone to occur, and if it is a long-term low-voltage power supply, it may easily cause damage to some devices in the hard disk. Therefore, when using electronic product data lines, mixed operations are not recommended in specific operations.
Compared with the mobile hard disk, the data line of the mobile phone will be more "firm", even if the same brand of electronic products, the caliber of the connector is the same, and generally can not be mixed. Some mobile phone data line interfaces match, but the operation is not available. In this case, due to the power supply problem, the instability of the main board may be caused, and it is necessary to pay attention to the specification of the data line. Different types of mobile phone data lines do not mix. Since the data line interface of the computer is current when the mobile phone is connected to the computer, if the relative current is inconsistent, there is a danger of burning the main board and battery of the mobile phone.


