What is the reason for the slow charging of the three-in-one data line

Apr 15, 2021|

The first thing you need to know is what determines the charging speed of your phone. With the continuous development of smart phones, the screen size and system configuration are constantly improved, and the battery capacity is also constantly increasing.

What are the differences between different phone chargers

Early mobile phones were typically charged with a 5V1A charger, which was controlled by an internal charging management chip after input of 5V voltage. Then there are 5V2A and 5V4A chargers, but with the increase of the output current of the charger, the requirements of charging wire and interface will be improved, so now the fast charging of mobile phones, in order to increase the power of charging and reduce the charging current, is generally achieved by increasing the input voltage. Although the input voltage is increased, it will still be depressurized by the control chip after input to the phone, increasing the charging current at the battery end.

The current or speed at which the phone is charged is ultimately controlled by the charge management chip, such as 1A charge and 2A charge. But to achieve the premise of this charging current, one is that the charger should have enough output capacity, the second point is the quality of the charger line, to have a small enough voltage drop, the third point is more important, is the handshake between the charger and the phone or called the protocol recognition. The charger of the mobile phone uses a standard USB interface with a rated output voltage of 5V. In addition to a set of power output, the remaining set of data lines of the USB interface are used to identify the protocol.

700(1)

Send Inquiry