Voltage Transformer
Nov 27, 2019| Shenzhen Shenchuang Hi-tech Electronics Co., Ltd(SChitec) is a high tech enterprise which specialized in phone accessories production and sales. Our main products include travel chargers, car chargers, USB cables, power banks and other digital products.All products are safe and reliable, with unique styles.products pass certificates like CE,FCC,ROHS,UL,PSE,C-Tick,etc, If you are interested in, you can contact ceo@schitec.com directly.
Stay Charging Safely with SChitec
Voltage Transformer
By purpose
Measuring voltage Transformer or measuring winding of voltage Transformer: within the normal voltage range, provide the grid voltage information to the measuring and metering device;
Protection voltage Transformer or protective winding of the voltage Transformer: In the state of the power grid fault, provide the power grid fault voltage information to devices such as relay protection.
Divided by insulation medium
Dry-type voltage Transformer: It is impregnated with insulating varnish as insulation by common insulating materials, and it is mostly used at low voltage level and below;
Pouring Insulation Voltage Transformer: Cast from epoxy resin or other resin mixed materials. It is mostly used at voltage levels below.
Oil-immersed voltage Transformer: Insulating paper and insulating oil are used as insulation. It is the most common structural type in China and is often used for voltage levels below.
Gas-insulated voltage Transformer: Gas is used as main insulation, which is mostly used in higher voltage levels.
The low-voltage Transformers usually used for measurement are dry, and the high-voltage or ultra-high-voltage sealed gas-insulated (such as sulfur hexafluoride) Transformers are also dry. Pouring type is suitable for voltage Transformers of 35kV and below. Products above 35kV are oil-immersed.
Divided by number of phases
Most products are single-phase. Because the voltage Transformer has a small capacity and a small body, the internal and external insulation requirements between the three-phase high-voltage bushings are difficult to meet, so only 3-15kV products sometimes use three-phase structures.
According to the principle of voltage conversion
Electromagnetic voltage Transformer: The voltage is transformed according to the principle of electromagnetic induction. The principle is completely similar to the basic structure and Transformer. Most voltage levels in China and below are adopted;
Capacitive voltage Transformer: It consists of a capacitor voltage divider, a compensation reactor, an intermediate Transformer, a damper, and a carrier device protection gap. It is used in neutral grounding systems for voltage measurement, power measurement, relay protection, and carrier communication. use;
Photoelectric voltage Transformer: The voltage conversion is realized through the photoelectric conversion principle, which is still under development.
According to the conditions of use
Indoor type voltage Transformer: installed in indoor power distribution devices, generally used at and below the voltage level;
Outdoor-type voltage Transformer: Installed in outdoor power distribution devices, mostly used at voltage level and above.
According to the winding to ground operation status
Voltage Transformer with primary winding grounded: The end of the primary winding of a single-phase voltage Transformer or the neutral point of the primary winding of a three-phase voltage Transformer is directly grounded;
Voltage Transformers with no primary winding: Single-phase voltage Transformers are insulated from the ground at both terminals of the primary winding; all parts of the primary winding of the three-phase voltage Transformer, including the terminals, are insulated from ground, and The rated insulation levels are consistent.
Divided by magnetic circuit structure
Single-stage voltage Transformer: primary winding and secondary winding (multiple secondary windings can be set on the same iron core as required, and the iron core is the ground potential. In China, single-stage voltage is used for voltage levels below;
Cascade type voltage Transformer: the primary winding is divided into several units with the same number of turns and connected in series between phase and ground. Each unit has its own independent iron core, has multiple iron cores, and the iron core carries high voltage. Secondary winding (multiple secondary windings can be set at the last unit connected to ground as required. This type of structure is commonly used in voltage levels in China;
Combined Transformer: A Transformer that is combined and formed by a voltage Transformer and a current Transformer is called a combined Transformer, and there is also a Transformer that is produced together with a combined electrical appliance as a combined Transformer.


