USB data cable has a shield function, you know?
Apr 17, 2018| We can see that the high-end USB data cable is usually composed of: plastic shell - braided mesh - aluminum foil - copper core. The innermost layer is covered with a colored insulated conductor core (copper core) for the transmission of data signals and currents, and the plastic case is used to protect the wires; the role of the braided mesh and aluminum foil layer is to provide a shielding function.
One of the important functions of USB data lines is the transmission of data signals. But when we use around there may be a variety of interference information. If these interfering signals enter the inner conductor of the data line, superimposing on the originally transmitted signal is less likely to interfere with or change the original transmission of the signal, leading to loss of useful signals or problems?
Some weaving nets and aluminum foil layers play a role in protecting and shielding the information we want to transmit. Of course, not all USB data lines have two layers of shielding, some with multiple shielding layers, some with only one layer, or even none. Shielding is the separation of metal between two spatial regions and is used to control the induction and radiation of electric and magnetic fields and electromagnetic waves from one region to another. That is, the conductor cores are surrounded by shields to prevent them from being affected by external electromagnetic fields/interference signals. The shield cores are used to surround the conductor cores.
The shielding layer of the USB data line is mainly made of non-magnetic materials such as copper and aluminum, and is usually a braided copper mesh (aluminum-magnesium braided mesh) or a copper foil (aluminum foil, etc.), and its thickness is very thin, much smaller than the frequency of use of the metal material. Skin depth. It should be noted that one end must be connected to the circuit signal, because the shielding effect is mainly due to the metal body itself is not in the electric field, but due to the grounding of the shielding layer, different forms of grounding will directly affect the shielding effect.
The production process of common shielded wire rods is as follows:
Stranded Copper - Extruded (Inner Core) - Winding (Inner Core) - Clad Aluminum Foil - Braided (or Entangled) - Extruded (Outside)
In electronic connections, letters are often used to identify the use of materials, such as:
AL stands for aluminum, such as 4C+AL, meaning a 4-wire aluminum wire package.
AB stands for weaving, such as 4C+80/0.10AB, which means 4-core braided wire. The braided specification is 80 copper wires with an outer diameter of 0.10 mm.
S represents the winding, such as 4C+60/0.10S, which means 4C winding wire, and the specification of the winding is 60 0.10mm OD copper wire.


