Resistance naming
Nov 02, 2019| Stay Charging Safely with SChitec
Resistance naming
The naming method of Chinese chip resistors:
1, 5% precision naming: RS-05K102JT
2, 1% precision naming: RS-05K1002FT
R - indicates resistance
S - indicates that power 0402 is 1/16W, 0603 is 1/10W, 0805 is 1/8W, 1206 is 1/4W, 1210 is 1/3W, 1812 is 1/2W, 2010 is 3/4W, and 2512 is 1W.
05 - indicates size (inches): 02 indicates 0402, 03 indicates 0603, 05 indicates 0805, 06 indicates 1206, 1210 indicates 1210, 1812 indicates 1812, 10 indicates 2010, and 12 indicates 2512.
K - indicates a temperature coefficient of 100 PPM,
102-5% precision resistance representation: the first two digits represent a significant number, the third digit indicates how many zeros, the basic unit is Ω, 102 = 1000 Ω = 1 KΩ. 1002 is a 1% resistance representation: the first three digits represent significant digits, the fourth digit indicates how many zeros, the basic unit is Ω, and 1002 = 10000 Ω = 10 kΩ.
J - indicates an accuracy of 5% and F- indicates an accuracy of 1%.
T - indicates tape packaging
Chip resistor resistance error accuracy is ±1%, ±2%, ±5%, ±10% accuracy, the most common use is ±1% and ±5%,
The rule of ±5% precision is to use three digits to represent the example 512. The first two digits are significant digits, the third digit 2 indicates how many zeros, the basic unit is Ω, which is 5100 ohms, 1000 Ω = 1 Ω, 1000000 Ω. =1MΩ
In order to distinguish ± 5%, ± 1% of the resistance, then ±1% of the resistance is mostly expressed by 4 digits.
Thus the first three digits represent a significant number, and the fourth digit indicates how many zeros are 4531, which is 4530Ω, which is equal to 4.53KΩ.


