Recognize switching power supplies and linear power supplies

Nov 17, 2019|

Shenzhen Shenchuang Hi-tech Electronics Co., Ltd(SChitec) is a high tech enterprise which specialized in phone accessories production and sales. Our main products include travel chargers, car chargers, USB cables, power banks and other digital products.All products are safe and reliable, with unique styles.products pass certificates like CE,FCC,ROHS,UL,PSE,C-Tick,etc,  If you are interested in, you can contact ceo@schitec.com directly.

 

Stay Charging Safely with Schitec

Recognize switching power supplies and linear power supplies

 

It is well known that many electronic devices and electrical control devices operate from a DC power source. Before the switching power supply appeared, the operating power of these devices mostly used linear power.

A linear power supply is a device that uses a power adjustment tube in series with a load to stabilize the output DC voltage or current, also called a series-regulated DC regulated power supply. It has two types of DC voltage regulator and DC current regulator. The linear power supply is generally composed of a power frequency transformer, an uncontrolled rectifier filter circuit, an adjustment tube, and a control circuit. The input AC power is isolated and transformed by the power frequency transformer, rectified and filtered, and adjusted by the regulating tube to provide a stable voltage or current to the load. When the input AC voltage or the load terminal current changes cause the output to be unstable, the control circuit changes the voltage drop (conduction degree) of the adjustment tube according to the change of the output, so that the output DC voltage or current remains stable. The linear power supply has the advantages of simple circuit, small ripple, good electromagnetic compatibility, high voltage regulation accuracy and low cost. However, its internal power consumption, low efficiency, large volume, heavy weight, small dynamic range of input voltage, and output voltage cannot be higher than the input voltage are also obvious. It is compared as a low-power DC power supply, especially a micro-power DC power supply. suitable.

With the continuous development of electronic technology, the integration of electronic devices is increasing, the functions are getting stronger and stronger, and the volume requirements are getting smaller and smaller. Therefore, a new type of power supply with small size, light weight, high efficiency and good performance is urgently needed to meet the development needs of electronic equipment, and this demand has become a powerful driving force for the development of switching power supply technology.

The reason why the efficiency of the linear power supply is not high is that the adjustment tube works in a linear amplification state and the adjustment tube is in series with the load. This mode of operation causes a large voltage drop across the regulator tube, and the power loss is necessarily greater at heavy loads, especially when the AC input voltage is above the rated value.

In order to reduce the power loss, the first thing engineers want to change is the working state of the power tube. That is, the adjusting tube is not working in the amplified state but in the two states of saturation and cutoff, that is, the power tube is used as a switch, thereby reducing the power tube. The voltage drop across the ends reduces its power loss. This change in operating mode brings two problems, one is how to provide smooth DC power to the load, and the other is how to stabilize the output DC voltage. The solution to the first problem is to use low-pass filter filtering. The second problem is solved by using Time Ratio Control (TRC). The so-called time proportional control means that the saturation conduction of the control power tube is proportional to the time of the cutoff. The specific implementation method may be that the saturation conduction and the total cutoff time are fixed, and the saturation conduction time of the power tube is changed to change the time ratio. This method is called pulse width modulation; secondly, the power tube saturation conduction time is fixed, and the power is changed. The saturation conduction and cut-off total time of the tube changes the time ratio. This method is called pulse frequency modulation. The third is that the saturation conduction and cut-off total time of the power tube and the saturation time of the power tube are not fixed. Changing the period and saturation on-time to change the ratio of time is called hybrid modulation. Among the above three modulation methods, the application of pulse width modulation is the most widely used and popular.

Secondly, in order to reduce the volume of the linear power supply and reduce its weight, how to remove the AC input power frequency transformer becomes a key issue. If the power frequency transformer is simply removed, the circuit has a matching of the rectified DC voltage and subsequent circuits. The electrical isolation of the input and output, after research and exploration by engineers, found that the transformer can be inserted after the power switching device, the volume and weight of the transformer will decrease as the frequency of the power switching device increases, thereby reducing the whole The size and weight of the power supply. According to this idea, a switching power supply without a power frequency voltage (high frequency transformer) was obtained, and a switching power supply was born.

The mains directly passes the input filter, the diode rectifier circuit and the capacitor filter to obtain the DC voltage. The DC voltage is inverted by the inverter circuit into a high-frequency square wave pulse voltage, which is isolated by the high-frequency transformer and becomes an appropriate AC voltage. The output rectification and filtering circuit is converted to the required DC voltage output. When the input AC voltage or load changes, the DC output voltage also shows a trend of change. At this time, the time ratio of the square wave pulse voltage outputted by the inverter circuit can be adjusted, so that the DC output voltage is kept stable. Through the above, we can understand that the inverter circuit is the core of the switching power supply. In addition, since the range of audio that can be heard by the human ear is generally 20 Hz to 20 kHz, when the switching frequency of the inverter circuit is selected to be 20 kHz or more, irritating noise can be avoided.

 


Send Inquiry