Process preparation of bipolar integrated circuit

Nov 27, 2019|

Shenzhen Shenchuang Hi-tech Electronics Co., Ltd(SChitec) is a high tech enterprise which specialized in phone accessories production and sales. Our main products include travel chargers, car chargers, USB cables, power banks and other digital products.All products are safe and reliable, with unique styles.products pass certificates like CE,FCC,ROHS,UL,PSE,C-Tick,etc,  If you are interested in, you can contact ceo@schitec.com directly.

 

Stay Charging Safely with SChitec

Process preparation of bipolar integrated circuit

The figure shows the process flow of preparing a bipolar integrated circuit inverter using PN junction isolation technology.

The figure includes an NPN transistor and a load resistor R. The original material is a silicon single crystal rod with a diameter of 75-150 mm doped with P-type impurities, and the resistivity ρ = 10 ohm · cm or so. The process flow is: first, slice, grind, and polish (is a wafer preparation process) to prepare a circular silicon wafer with a thickness of about 300 to 500 microns as a substrate, and then perform epitaxial growth, oxidation, photolithography, diffusion, Evaporation, pressure bonding and multiple wafer cleaning, and finally surface passivation and finished packaging.

The fabrication of a bipolar integrated circuit chip requires 5 times of oxidation, 5 times of photolithography on a thin layer of silicon oxide (SiO2), and a pattern window for diffusion doping is etched. Finally, after two photolithographys, the metal-aluminum interconnect wiring and passivation window for pressure bonding are etched. Therefore, there are 7 masks for the entire set of bipolar integrated circuits. Even if the passivation process is usually omitted, 6 photolithography steps are required, and 6 masks are required.


Send Inquiry