Pcb welding technology
Oct 24, 2019| Stay Charging Safely with SChitec
Pcb welding technology
Pcb soldering technology In recent years, the development of the electronics industry process, it can be noted that a very obvious trend is reflow soldering technology. In principle, conventional inserts can also be reflow soldered, which is commonly referred to as through-hole reflow soldering. The advantage is that it is possible to complete all solder joints at the same time, minimizing production costs. However, temperature sensitive components limit the application of reflow soldering, whether it is a plug-in or SMD. Then people turn their attention to selective soldering. Reflow soldering in most applications
Introduction
Circuit boards, circuit boards, PCB boards, and post-selective soldering. This will be a cost-effective and efficient way to complete the remaining inserts and is fully compatible with future lead-free soldering.
The characteristics of the selective soldering process can be compared with the wave soldering to understand the process characteristics of selective soldering. The most obvious difference between the two is that the lower portion of the PCB in the wave soldering is completely immersed in the liquid solder, while in selective soldering, only a certain portion of the area is in contact with the solder wave. Since the PCB itself is a poor heat transfer medium, it does not heat the solder joints that melt adjacent components and PCB areas during soldering. The flux must also be pre-coated before soldering. Compared to wave soldering, the flux is only applied to the part of the PCB to be soldered, not the entire PCB. In addition, selective soldering is only suitable for soldering of the interposing components. Selective soldering is a completely new approach to thoroughly understand that selective soldering processes and equipment are necessary for successful soldering.
Selective Soldering Processes Typical selective soldering processes include: flux coating, PCB preheating, dip soldering, and drag soldering.


