PCB contact processing
Oct 24, 2019| Stay Charging Safely with SChitec
PCB contact processing
The solder mask green paint covers most of the copper surface of the circuit and only exposes the terminal contacts for soldering, electrical testing and board insertion. This endpoint requires an additional protective layer to avoid oxides at the terminals of the anode (+) that are connected during long-term use, affecting circuit stability and creating safety concerns.
[Electroplating hard gold] On the plug-in end of the board (commonly known as gold finger) is coated with a layer of nickel and a highly chemically blunt gold layer to protect the end points and provide good connection performance, which contains an appropriate amount of cobalt, which is excellent. Wear characteristics.
[Spray tin] Covers a layer of tin-lead alloy on the soldering end of the board with a hot air leveling to protect the board ends and provide good soldering performance.
[Pre-welding] Overlay the upper layer of anti-oxidation pre-weld film on the soldering end of the board, temporarily protect the soldering end point and provide a flat soldering surface before soldering, so as to have good soldering performance.
[Carbon ink] A layer of carbon ink is printed on the contact end of the board to protect the end points and provide good connection performance.
Mold cutting
Cut the board into a CNC molding machine (or die press) to the customer's desired size. When cutting, the plug is fixed on the bed (or mold) through the previously drilled positioning hole. After the cutting, the gold finger portion is further processed by the bevel angle to facilitate the plugging of the circuit board. For the multi-chip forming circuit board, it is necessary to add an X-shaped broken line (known in the industry as V-Cut) to facilitate the customer to split and disassemble after the plug-in. Finally, the dust on the board and the surface ionic contaminants are washed.
Final inspection package
The final electrical conduction, impedance test, and solderability and thermal shock resistance tests were performed on the board prior to packaging. And with appropriate baking to eliminate the moisture and accumulated thermal stress of the board during the process, and finally packaged in a vacuum bag.


