How to deal with bad data lines?

     The data line has been used, I believe we have encountered such a thing, that is, when the data line is used in bad contact, suddenly encountered this kind of situation will be very depressing, affecting our use. So how do you deal with bad data lines? Then what should you do

     The use of mobile data lines is very extensive. Downloading pictures and music from websites is a simple matter. However, if your data cable is connected to a computer, there will always be poor contact. Here's a little trick for you to find out in the course of use, and the effect is very, very stable. From now on, no matter how you move, there will not be any bad contact. You may wish to try it out.

     Let's talk about the N73's data line is connected to the phone's bad contacts: We can see that the N73's data line is only used width 1.5mm arch rectangular metal sheet, and the interface width on the phone is also in the 1.5mm, when the data line After connecting with the mobile phone, the metal strip on the data line is vacant for various reasons.

     We look at the interface of the headset data line, is a single piece, only 1.2mm thickness and contact with the phone after a good connection will not have any problems, look at the 3250 data line. It is also a single piece, and the thickness is only 1.2mm and the contact after the mobile phone is connected is also very good without any problems.

     The following is a little bit of treatment on the N73 data line: the use of tools is a manicure tool, the N73 data line on both sides of the metal sheet to repair 5 wire to 10 wire, which is 0.05-0.1mm, with a certain degree of inclination to repair , Do not direct repair, repair the metal after the top of both sides smaller than the original, and then connected to the computer is very stable, will not appear intermittent.

     In fact, these are some simple steps. I believe you can find your own tips from the use of the process.