Diode forward and reverse
Nov 02, 2019| Stay Charging Safely with SChitec
Diode forward and reverse
When the forward voltage is applied, the forward voltage is small at the beginning of the forward characteristic, which is insufficient to overcome the blocking effect of the electric field in the PN junction. The forward current is almost zero. This segment is called the dead zone. This forward voltage that does not turn the diode on is called the deadband voltage. When the forward voltage is greater than the deadband voltage, the electric field in the PN junction is overcome, the diode is forward-conducting, and the current rises rapidly as the voltage increases. In the current range of normal use, the terminal voltage of the diode remains almost constant during turn-on. This voltage is called the forward voltage of the diode.
Reverse
When the applied reverse voltage does not exceed a certain range, the current through the diode is the reverse current formed by the minority carrier drift motion. Since the reverse current is small, the diode is in an off state. This reverse current is also called reverse saturation current or leakage current, and the reverse saturation current of the diode is greatly affected by temperature.


