Data line manufacturers teach you how to repair data lines
Jul 25, 2018| In daily life, everyone can not do without the use of data lines to charge the phone or transmit data to fulfill dual duties. Due to the high frequency of use, there are many times of failure, and if a friend with strong hands ability is completely repairable, according to the method I provide to repair, 100% can be repaired, and as beautiful and durable as the original.
The following describes the method: Prepare the following tools: soldering iron, solder paste, solder wire, universal meter, small knife, and other necessary tools.
The end that opens the data line to connect the mobile phone, is the clip structure, uses the small guillotine to gently detour the clip, and then the nail cover is inserted into the gap in the middle and gently smashed upwards to open. Using a universal meter to measure whether each line is normally connected, most of the failures are caused by a break in one of the wires and the outside cannot be seen, resulting in the normal use of the data line.
After finding out the problem, use the Lok-Tie to remove the white wire and solder the white wire as shown above.
After welding, wrap it with insulating tape as shown below. After being wrapped, it can be used as beautiful and durable.